鱼C论坛

 找回密码
 立即注册
查看: 2740|回复: 9

谁可以帮下忙~新手刚刚开始入门C语言~

[复制链接]
发表于 2012-2-23 20:52:44 | 显示全部楼层 |阅读模式
1鱼币
在编程完成后准备要调试的时候老是出现错误~我怀疑和编码没有关系
错误提示是这样的:


warning C4182: #include nesting level is 363 deep; possible infinite recursion
fatal error C1076: compiler limit : internal heap limit reached; use /Zm to specify a higher limit


谁可以帮帮忙~解决下问题呀谢谢~~~

想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
发表于 2012-2-23 22:43:23 | 显示全部楼层
不是代码的问题,你的VC6 include路径有问题。你是不是原来装过VC6,卸载了,然后又重装了?
能否将
工具--选项--目录---下面有 inclue路径
截图来看看
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

 楼主| 发表于 2012-2-24 02:27:36 | 显示全部楼层

这个论坛我没有办法传图片~~这样吧你加我下QQ好么~?这个是我的QQ:332839000(加我的时候注明下谢谢) C截图.rar (24.45 KB, 下载次数: 0, 售价: 1 鱼币)


真心想解决这个棘手的问题~~~这样我C程序都不能学了~谢谢~~非常感谢~
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

 楼主| 发表于 2012-2-24 14:23:20 | 显示全部楼层
仰望天上的光 发表于 2012-2-23 22:43
不是代码的问题,你的VC6 include路径有问题。你是不是原来装过VC6,卸载了,然后又重装了?
能否将
工具 ...

我把路径改了下,现在好了!谢谢提醒
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2012-2-25 18:17:12 | 显示全部楼层
我也出现过这种情况,百度一下错误代码,改过路径就行了。
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2012-8-20 11:24:50 | 显示全部楼层

错误代码及错误信息 错误释义

error 1: Out of memory 内存溢出
error 2: Identifier expected 缺标识符
error 3: Unknown identifier 未定义的标识符
error 4: Duplicate identifier 重复定义的标识符

error 5: Syntax error 语法错误

error 6: Error in real constant 实型常量错误

error 7: Error in integer constant 整型常量错误

error 8: String constant exceeds line 字符串常量超过一行

error 10: Unexpected end of file 文件非正常结束

error 11: Line too long 行太长

error 12: Type identifier expected 未定义的类型标识符

error 13: Too many open files 打开文件太多

error 14: Invalid file name 无效的文件名

error 15: File not found 文件未找到

error 16: Disk full 磁盘满

error 17: Invalid compiler directive 无效的编译命令

error 18: Too many files 文件太多

error 19: Undefined type in pointer def 指针定义中未定义类型

error 20: Variable identifier expected 缺变量标识符

error 21: Error in type 类型错误

error 22: Structure too large 结构类型太长

error 23: Set base type out of range 集合基类型越界

error 24: File components may not be files or objectsfile分量不能是文件或对象

error 25: Invalid string length 无效的字符串长度

error 26: Type mismatch 类型不匹配

error 27:error 27:Invalid subrange base type 无效的子界基类型

error 28:Lower bound greater than upper bound 下界超过上界

error 29:Ordinal type expected 缺有序类型

error 30:Integer constant expected 缺整型常量

error 31:Constant expected 缺常量

error 32:Integer or real constant expected 缺整型或实型常量

error 33:Pointer Type identifier expected 缺指针类型标识符

error 34:Invalid function result type 无效的函数结果类型

error 35:Label identifier expected 缺标号标识符

error 36:BEGIN expected 缺BEGIN

error 37:END expected 缺END

error 38:Integer expression expected 缺整型表达式

error 39:Ordinal expression expected 缺有序类型表达式

error 40:Boolean expression expected 缺布尔表达式

error 41:Operand types do not match 操作数类型不匹配

error 42:Error in expression 表达式错误

error 43:Illegal assignment 非法赋值

error 44:Field identifier expected 缺域标识符

error 45:Object file too large 目标文件太大

error 46:Undefined external 未定义的外部过程与函数

error 47:Invalid object file record 无效的OBJ文件格式

error 48:Code segment too large 代码段太长

error 49:Data segment too large 数据段太长

error 50:DO expected 缺DO

error 51:Invalid PUBLIC definition 无效的PUBLIC定义

error 52:Invalid EXTRN definition 无效的EXTRN定义

error 53: Too many EXTRN definitions 太多的EXTRN定义

error 54:OF expected 缺OF

error 55:INTERFACE expected 缺INTERFACE

error 56:Invalid relocatable reference 无效的可重定位引用

error 57:THEN expected 缺THEN

error 58:TO or DOWNTO expected 缺TO或DOWNTO

error 59:Undefined forward 提前引用未经定义的说明

error 61:Invalid typecast 无效的类型转换

error 62:Division by zero 被零除

error 63:Invalid file type 无效的文件类型

error 64:Cannot read or write variables of this type 不能读写此类型变量

error 65:Pointer variable expected 缺指针类型变量

error 66:String variable expected 缺字符串变量

error 67:String expression expected 缺字符串表达式

error 68:Circular unit reference 单元UNIT部件循环引用

error 69:Unit name mismatch 单元名不匹配

error 70:Unit version mismatch 单元版本不匹配

error 71:Internal stack overflow 内部堆栈溢出

error 72:Unit file format error 单元文件格式错误

error 73:IMPLEMENTATION expected 缺IMPLEMENTATION

error 74:Constant and case types do not match 常量和CASE类型不匹配

error 75:Record or object variable expected 缺记录或对象变量

error 76:Constant out of range 常量越界

error 77:File variable expected 缺文件变量

error 78:Pointer expression expected 缺指针表达式

error 79:Integer or real expression expected 缺整型或实型表达式

error 80:Label not within current block 标号不在当前块内

error 81:Label already defined 标号已定义

error 82:Undefined label in preceding statement part 在前面未定义标号

error 83:Invalid @ argument 无效的@参数

error 84:UNIT expected 缺UNIT

error 85: ";" expected 缺“;”

error 86: ":" expected 缺“:”

error 87: "," expected 缺“,”

error 88: "(" expected 缺“(”

error 89: ")" expected 缺“)”

error 90: "=" expected 缺“=”

error 91: ":=" expected 缺“:=”

error 92: "[" or "(." Expected 缺“[”或“(.”

error 93: "]" or ".)" expected 缺“]”或“.)”

error 94: "." expected 缺“.”

error 95: ".." expected 缺“..”

error 96:Too many variables 变量太多

error 97:Invalid FOR control variable 无效的FOR循环控制变量

error 98:Integer variable expected 缺整型变量

error 99:Files and procedure types are not allowed here 该处不允许文件和过程类型

error 100:String length mismatch 字符串长度不匹配

error 101:Invalid ordering of fields 无效域顺序

error 102:String constant expected 缺字符串常量

error 103:Integer or real variable expected 缺整型或实型变量

error 104:Ordinal variable expected 缺有序类型变量

error 105:INLINE error INLINE错误

error 106:Character expression expected 缺字符表达式

error 107:Too many relocation items 重定位项太多

error 108:Overflow in arithmetic operation 算术运算溢出

error 112:CASE constant out of range CASE常量越界

error 113:Error in statement 表达式错误

error 114:Cannot call an interrupt procedure 不能调用中断过程

error 116:Must be in 8087 mode to compile this 必须在8087模式编译

error 117:Target address not found 找不到目标地址

error 118:Include files are not allowed here 该处不允许INCLUDE文件

error 119:No inherited methods are accessible here 该处继承方法不可访问

error 121:Invalid qualifier 无效的限定符

error 122:Invalid variable reference 无效的变量引用

error 123:Too many symbols 符号太多

error 124:Statement part too large 语句体太长

error 126:Files must be var parameters 文件必须是变量形参

error 127:Too many conditional symbols 条件符号太多

error 128:Misplaced conditional directive 条件指令错位

error 129:ENDIF directive missing 缺ENDIF指令

error 130:Error in initial conditional defines 初始条件定义错误

error 131:Header does not match previous definition 和前面定义的过程或函数不匹配

error 133:Cannot evaluate this expression 不能计算该表达式

error 134:Expression incorrectly terminated 表达式错误结束

error 135:Invalid format specifier 无效格式说明符

error 136:Invalid indirect reference 无效的间接引用

error 137:Structured variables are not allowed here 该处不允许结构变量

error 138:Cannot evaluate without System unit 没有System单元不能计算

error 139:Cannot access this symbol 不能存取符号

error 140:Invalid floating point operation 无效的符号运算

error 141:Cannot compile overlays to memory 不能编译覆盖模块至内存

error 142:Pointer or procedural variable expected 缺指针或过程变量

error 143:Invalid procedure or function reference 无效的过程或函数调用

error 144:Cannot overlay this unit 不能覆盖该单元

error 146:File access denied 不允许文件访问

error 147:Object type expected 缺对象类型

error 148:Local object types are not allowed 不允许局部对象类型

error 149:VIRTUAL expected 缺VIRTUAL

error 150: Method identifier expected 缺方法标识符

error 151:Virtual constructors are not allowed 不允许虚构造函数

error 152:Constructor identifier expected 缺构造函数标识符

error 153:Destructor identifier expected 缺析构函数标识符

error 154:Fail only allowed within constructors 只能在构造函数内使用Fail标准过程

error 155:Invalid combination of opcode and operands 操作数与操作符无效组合

error 156:Memory reference expected 缺内存引用指针

error 157:Cannot add or subtract relocatable symbols 不能加减可重定位符号

error 158:Invalid register combination 无效寄存器组合

error 159:286/287 instructions are not enabled 未激活286/287指令

error 160:Invalid symbol reference 无效符号指针

error 161:Code generation error 代码生成错误

error 162:ASM expected 缺ASM

error 166:Procedure or function identifier expected 缺过程或函数标识符

error 167:Cannot export this symbol 不能输出该符号

error 168:Duplicate export name 外部文件名重复

error 169:Executable file header to

error 170:Too many segments 段太多
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2016-11-12 20:24:39 | 显示全部楼层
VC6 include路径
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2016-11-21 22:01:40 | 显示全部楼层
走出了栈的深度
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2016-12-31 11:04:08 | 显示全部楼层
学习学习
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

发表于 2017-2-16 12:51:38 | 显示全部楼层
你的VC6 include路径有问题,卸了重新装
想知道小甲鱼最近在做啥?请访问 -> ilovefishc.com
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|手机版|Archiver|鱼C工作室 ( 粤ICP备18085999号-1 | 粤公网安备 44051102000585号)

GMT+8, 2024-3-29 03:17

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表